Contact InterMotive with any questions regarding customizing a product to suit your needs.
Common control network that utilizes twisted-pair wires, provides diagnostic capabilities and real-time chassis data when used with an InterMotive Gateway system. It communicates with the chassis & uses that data as a condition set for load activation.
Provides up to 8 outputs (4 fixed/ 4 programmable) based of chassis CAN data that can drive automotive relays, LED's, & warning lights. This unit is programmed using free software provided by InterMotive.
Programmable relay-driven power distribution center. This can be programmed in the feild to suit your needs, is capable of CAN communications, and up to 3 PRPC's can be connected to control up to 45 loads.
Using the CVC501/502 will allow a rear a/c unit in an ambulance or bus to be run independent of the chassis a/c system. The CVC501 also incorporates a high idle function without any additional chassis connections.
Provides high idle and lift interlock along with outputs for chassis CAN data our Merlin multiplex system. One of the key elements from a driver’s stand point is the LED display panel for both the high idle and interlock functions.
Reads & converts Ford OEM CAN data to SAE J1939 format without interfering with the Ford data stream. A safe & secure data communication link to Ford data bus for J1939-based aftermarket equipment.