Automatically turns the engine off when specific, customizable, safety conditions are met, & restarts the engine when the service brake is depressed or anther condition has been achieved, reducing fuel consumption & green house gasses.
Provides up to 8 outputs (4 fixed/ 4 programmable) based of chassis CAN data that can drive automotive relays, LED's, & warning lights. This unit is programmed using free software provided by InterMotive.
Monitors powertrain conditions & turns vehicle off when certain safety conditions have been exceeded. Will work with fire suppression systems.
Automatically or manual elevation of vehicle's RPM's without requiring the Park Brake to be set. Special transit version with A/C as an autotrigger available
Field programmable unit that lets you limit the maximum speed without reducing engine output. This reduces gas consumption, while adding safety benefits (keeps your drivers from unsafe speeding.)
(Optional LED panel shown above)
Provides high idle and lift interlock along with outputs for chassis CAN data for our Merlin multiplex system. One of the key elements from a driver’s stand point is the LED display panel for both the high idle and interlock functions.
Set the speed at which overdrive is enabled & disabled, preventing the vehicle from going into OD at city speeds which improves the longevity of the transmission, brakes, & torque converter.
Common control network that utilizes twisted-pair wires, provides diagnostic capabilities and real-time chassis data when used with an InterMotive Gateway system. It communicates with the chassis & uses that data as a condition set for load activation.
Prevents the vehicle from being started if the emergency door (or window) is locked or open & provides an audible alert any time the emergency door is open & the ignition is on.
Guardian I & Guardian II are fully automatic lift interlock systems. Meets ADA Title 49 & FMVSS 403/404 lift interlock requirements
Completely automatic lift interlock. Fully FMVSS 403/404 wheel chair lift interlock.
HighLock is a very basic high idle and lift interlock system. The LED display panel provides information for the interlock functions.
(Optional Door Ajar LED panel shown)
Automatically switches the vehicle to "tow-haul" mode upon start up, to reduce brake wear by utilizing engine breaking.
ILIS-C & ILIS-P are fully automatic lift interlock systems. Meets ADA Title 49 & FMVSS 403/404 lift interlock requirements
Prevents the vehicle from being started in any gear other than park (eg. Neutral).
Provides an audible & visual alert when an object is behind a vehicle. Automatically activates when the vehicle is shifted into reverse. LED panel shows distance in feet & tenths of feet & the side (left, right) that the object is located on.